Publications by Wilko C Emmens

List of publications by W.C. Emmens (1949, retired 2011), CORUS R&D, in reverse chronological order. All articles are in English unless otherwise stated. To get a (photo)copy contact the author by mail NOTE: older digital files (<1999) may contain some characters in obsolete or non-standard font. Notably in graphs the characher 'æ' should be read as 'm' (greek mu, symbol for coefficient of friction).

Brief CV: born 23 May 1949, Nieuw-Amsterdam (Dr) 1961-1966 HBS-B (Chr. Lyceum Almelo, Chr. HBS Assen) 1966-1975 study Technical Physics, Material Science, Groningen University, graduated 1975-1979 researcher Univ. Utrecht, dept. Technical Physics 1980-2011 researcher Hoogovens/Corus/TataSteel R&D, IJmuiden, dept. Forming Technology 1997 Doctorate Thesis Univ. of Twente 2007-2011 secondment to Univ. of Twente, Enschede, dept. Engineering Mechanics Wilko C. Emmens lives at Hengelo (NL), is married and has two sons.

---

COPYRIGHT: All publications listed here are subjected to copyright. If the copyright is not specified you may use information or graphs from these publications without prior permission but with proper reference to the original publications. Note that some publications may contain pictures obtained from other author's publications that may be subjected to other copyright. In case of doubt always contact the original author to be sure.

---

	(click logo)	Affiliations: the affiliation of the author at the time of writing is indicated by the first logo (note that before 2000 Corus RD&T was known as Hoogovens R&D, and after 2010 as TATA Steel RD&T). The affiliation of co-authors is the same unless otherwise stated, with the exception of A.H. van den Boogaard and J. Huétink, who both are: University of Twente.
		48 W.C. Emmens, A.H. van den Boogaard Material characterization at high strain by adapted tensile tests Experimental Mechanics, 2012 download pre-print version as .pdf file (419 kb) © Emmens/van den Boogaard available from SpringerLink
		47 W.C. Emmens, A.H. van den Boogaard Cyclic stretch-bending: mechanics, stability and formability J. of Materials Processing Technology, Volume 211, 2011, Pages 1965-1981 download pre-print version as .pdf file (979 kb) © Elsevier B.V. available from ScienceDirect®
		46 A. Hadoush (M2i, Delft), A.H. van den Boogaard, W.C. Emmens A numerical investigation of the continuous bending under tension test J. of Materials Processing Technology, Volume 211, 2011, Pages 1948-1956 download pre-print version as .pdf file (782 kb) © Elsevier B.V. available from ScienceDirect®
		45 W.C. Emmens FORMABILTY - A review of parameters and processes that control, limit or enhance the formability of sheet metal. Springer Briefs 2011 more information
		44 W.C. Emmens, A.H. van den Boogaard Formability in Incremental Sheet Forming and Cyclic Stretch-Bending Proceedings 10th ICTP, Aachen, Germany, Sept 25-30. 2011 download pre-print version as .pdf file (132 kb) published as: Steel Research International Special Issue, pp 513-518 © Wiley-VCH
		43 W.C. Emmens, A.H. van den Boogaard The stabilizing effect of bending-under-tension Proceedings 14th EsaForm, Belfast, N-Ireland UK, April 27-29, 2011 download pre-print version as .pdf file (108 kb) published as: AIP Conf. Proc. 1353 1583-1588 (2011) © AIP available from AIP
		42 W.C. Emmens, G. Sebastiani (University of Dortmund), A.H. van den Boogaard The technology of Incremental Sheet Forming - A brief review of the history J. of Materials Processing Technology, Volume 210, 2010, Pages 981-997 download pre-print version as .pdf file (600 kb) © Elsevier B.V. available from ScienceDirect®
		41 W.C. Emmens, A.V. Kazantzis, J.Th.M de Hosson (both: University of Groningen) A.H. van den Boogaard Fractional behaviour at cyclic stretch-bending Proceedings IDDRG International Conference 2010, Graz, Austria, May 31 - June 2, 2010 © International Deep-Drawing Research Group download article as .pdf file (520 kb)
		40b A.H. van den Boogaard, W.C. Emmens, J.Huétink Effect of Thickness Stress in Stretch-Bending (note: this is a slighty expanded version of 40a) Proceedings 10th Numiform, Pohang, Korea, June 13-17, 2010 download article as .pdf file (158 kb) published as: AIP Conf. Proc. 1252 504-511 (2010) © AIP
		40a W.C. Emmens, A.H. van den Boogaard Contact effects in bending affecting stress and formability Proceedings 13th EsaForm, Brescia, Italy, April 7-9, 2010 download article as .pdf file (113 kb) published as: Intern. Journal of Material Forming, Volume 3, Supplement 1, 1159-1162 © Springer-Verlag available from SpringerLink
		39 W.C. Emmens, A.H. van den Boogaard Incremental forming by continuous bending under tension - an experimental investigation J. of Materials Processing Technology, Volume 209, Issue 14, 19 July 2009, pp 5456-5463 download pre-print version as .pdf file (345 kb) © Elsevier B.V. available from ScienceDirect®
		38 W.C. Emmens, D.H. van der Weijde (Corus RD&T), A.H. van den Boogaard The FLC, enhanced formability, and incremental forming Proceedings IDDRG 2009 Int. Conference, Golden CO, USA, June 1-3, 2009, pp 773-784 © International Deep-Drawing Research Group download article as .pdf file (693 kb)
		37 W.C. Emmens, A.H. van den Boogaard Incremental Sheet Forming Analyzed by Tensile Tests Proceedings 13th Shemet, Birmingham, UK, April 6-8, 2009 published as: Key Engineering Materials, Vols. 410-411 (2009) pp 347-354 © Trans Tech Publishing Inc available from Scientific.Net
		36 W.C. Emmens, A.H. van den Boogaard An overview of stabilizing deformation mechanisms in incremental sheet forming J. of Materials Processing Technology, Volume 209, Issue 8, 21 April 2009, Pages 3688-3695 download pre-print version as .pdf file (128 kb) © Elsevier B.V. available from ScienceDirect®
		35 W.C. Emmens, A.H. van den Boogaard Mechanisms in Incremental Sheet Forming 2nd Intern. Seminar on Novel Sheet Metal Forming Technologies, Helsinki Finland, Oct 29-30, 2008 download presentation as .pdf file (564 kb)
		34 W.C. Emmens, A.H. van den Boogaard Incremental forming studied by tensile tests with bending Proceedings 9th ICTP, Gyeongju, Korea, Sept 7-11, 2008, paper TB2-2 © ICTP download article as .pdf file (140 kb)
		33 W.C. Emmens, A.H. van den Boogaard Extended tensile testing with simultaneous bending Proceedings IDDRG 2008 Int. Conference, Olofstrom, Sweden, June 16-18, 2008 © International Deep-Drawing Research Group download article as .pdf file (375 kb)
		32 W.C. Emmens, A.H. van den Boogaard Tensile tests with bending: a mechanism for incremental forming Proceedings 11th EsaForm, Lyon, France, April 23-25, 2008 download article as .pdf file (129 kb) published as: Intern. Journal of Material Forming, Volume 1, Supplement 1, 1155-1158 © Springer/Esaform available from SpringerLink
		31 W.C. Emmens, A.H. van den Boogaard Formability created by the Bauschinger effect? Proceedings 2nd ICNFT, Bremen, Germany, Sept 20-21, 2007, pp 79-86 download article as .pdf file (204 kb)
		30 W.C. Emmens, A.H. van den Boogaard Strain in Shear, and Material Behaviour in Incremental Forming Proceedings 12th Shemet, Palermo, Italy, April 1-4, 2007 published as: Key Engineering Materials, Volume 344 (2007), pp 519-526 © Trans Tech Publishing Inc available from Scientific.Net
		29 W.C. Emmens Detailed Incremental Forming of Steel Beverage Cans by a High-Pressure Water Jet (note: this is a sequel to #28) Proceedings 12th Shemet, Palermo, Italy, April 1-4, 2007 published as: Key Engineering Materials, Volume 344 (2007), pp 567-574 © Trans Tech Publishing Inc avialable from Scientific.Net
		28b W.C. Emmens Water Jet Forming of Steel Beverage Cans (note: identical to #28a) Int. J. of Machine Tools & Manufacture, Volume 46, Issue 11, Sept. 2006, pp. 1243-1247 © Elsevier B.V. available from ScienceDirect®
		28a W.C. Emmens Water Jet Forming of Steel Beverage Cans Proceedings 1st ICNFT, Harbin, China, Sept. 6-9, 2004, pp 285-290 download article as .pdf file (88 kb)
		27 W.C. Emmens Hardening in Deep Drawing (note: this is a sequel to #26) IDDRG Working Group meetings, June 8-9, 2000, Ann Arbor, MI, USA download article as .pdf file (166 kb)
		26 W.C. Emmens Hardening in Sheet Metal Forming, Effect of Strain Path. IDDRG Working Group Meetings, June 7-9, 1999, Birmingham, UK download article as .pdf file (90 kb)
		25 W.C. Emmens, J. Bottema Friction of Aluminium in Deep Drawing Proceedings 20th IDDRG Biennial Congress, June 17-19, 1998, Brussels, Belgium, pp 203-214 download article as .pdf file (104 kb)
		24 W.C. Emmens Tribology of Flat Contacts and its Application in Deep Drawing. THESIS University of Twente, the Netherlands, 21 November 1997 more information and download
		23 W.C. Emmens Some Frictional Aspects of Aluminium in Deep Drawing. Proceedings 1st International Congress on Tribology of Manufacturing Processes (ICTMP), Gifu, Japan, October 19-23 1997, pp. 114-121 download article as .pdf file (103 kb) download presentation as .pdf file (84 kb)
		22 C.T. Lahaye, W.C. Emmens, J. Bottema, F. Schoepen, G. Verhoeven Influence of Substrate Texture on Forming and Paint Appearance of Aluminium Sheet Material. Proceedings IBEC 1997, Stuttgart, Germany, Sept 30 - Oct 2, 1997 published as: Automotive Body Painting, vol 32, pp 107-114
		21 W.C. Emmens Deep Drawing of Aluminium, the Ultimate Material? IDDRG Working Group Meetings, Haugesund, Norway, May 1997 download short article as .pdf file (38 kb)
		20 J. Staeves (PtU, Darmstadt), W.C. Emmens Eigenschaften und Beurteilung von Blechen. (in German) Proceedings 6. Umformtechnisches Kolloquium Darmstadt, March 11-12 1997, pp. 33-47
		19 W.C. Emmens, F Schoepen Some frictional aspects of aluminium in sheet metal forming. Proceedings 19th IDDRG Congress, Eger, Hungary, June 10-14 1996, pp. 487-496
		18 W.C. Emmens Wall ironing of extruded aluminium parts. Proceedings 9th ICFC, Birmingham, England, May 22-26 1995, pp. 77-84
		17 C.M. Dane, W.C. Emmens Influence of die dimensions on the reliability of measured coefficients of friction. IDDRG Working Group Meetings, Colmar, France, May 1995
		16 W.C. Emmens, P.J.J. Kok, N.A.J. Langerak, G. Boelens, R. Baartman Vervormingstechnologie. (in Dutch) Materialen, March 1992, pp. 27-35
		15 W.C. Emmens A Novel Design Friction Tester. IDDRG Working Group Meetings, Pisa, Italy, May 1991
		14 W.C. Emmens, G. Monfort The influence of process conditions and surface characteristics on friction at low pressure. Proceedings 3rd ICTP, Kyoto, Japan, July 1-6 1990, pp. 1277-1284
		13 W.C. Emmens Results of a Round Robin Test about the Accuracy of Roughness Measurements. IDDRG Working Group Meetings, Gothenburg, Sweden, June 1990
		12 W.C. Emmens Some aspects of the friction of zinc-coated steel. IDDRG Working Group Meetings, Budapest, Hungary, April 1989
		11 W.C. Emmens The influence of surface roughness on friction. Proceedings 15th IDDRG Congress, Dearborn, MI, USA, May 16-18 1988, pp. 63-70 download scanned copy as .pdf file (452 kb)
		10 W.C. Emmens Some frictional aspects in deep drawing. IDDRG Working Group Meetings, Schaffhausen, Switzerland, May 1987
		9b W.C. Emmens, H. Vegter, E. Janssen The influence of surface roughness on the formability of cold-rolled sheet. IDDRG Working Group Meetings, München, Germany, April 1986
		9a W.C. Emmens, H. Vegter, E. Janssen Roughness and Formability. (note: this is a poster version of #9b) Proceedings 14th IDDRG Congress 1986, Köln, Germany, April 21-23 1986, pp. 398-399
		8 W.C. Emmens Material saving by using a variable blankholder force. IDDRG Working Group Meetings, Amsterdam, the Netherlands, May 1985
		7 W.C. Emmens, L. Hartman The Effect of Surface Roughness on the Formability of Cold-Reduced Sheet Steel. Proceedings 13th IDDRG Congress 1984, Melbourne, Australia, February 20-24 1984, pp. 491-503
		6 W.C Emmens, L. Hartman A Computer Controlled and Data Collecting Industrial Deep Drawing Press for Laboratory Work. IDDRG Working Group Meetings, Helsinki, Finland, June 1983
		5 A.L. Mulder, W.C. Emmens, J.W. Drijver, S. Radelaar Influence of Annealing and Surface Conditions on the Strength of Metglas 2826A. Proceedings of the Conference on Metallic Glasses: Science and Technology, Budapest, 1980
		4 J.W. Drijver, A.L. Mulder, W.C. Emmens, S. Radelaar Stability of Mechanical properties of Metglas 2826A. Proceedings Third International Conference on Rapidly Quenched Metals, University of Sussex, Brighton, UK, June 3-7, 1978
		3 W.C. Emmens, S. Radelaar Energie-opslag in vliegwielen (in Dutch). De Ingenieur, vol 88, no. 47, November 18, 1976, pp 943-947
		2 W.C Emmens, A.L.Mulder Non-Conventional Materials in Flywheel Technology. First European Symposium on Flywheel Energy Storage, Thielle/Neuchâtel, Switzerland, September 14-15, 1976
		1 W.C. Emmens, J. Vrijen, S. Radelaar Crystallization of amorphous Pd0.75Ag0.05Si0.20 under hydrostatic stress. Journal of Non-Crystalline Solids, vol. 18, no. 2, September 1975, pp. 299-302 © Elsevier B.V. available from ScienceDirect®